There are also many points needing attention in the cushion installation of hot-pressing plate. In the process of hot-pressing plate processing, attention should be paid to prevent malfunction caused by wrong operation. Kunshan Hongxin Hot Press Plate Co., Ltd., one of the manufacturers of Suzhou Hot Press Plate, today brings you some relevant contents that you should pay attention to when carrying out cushioning of hot press plate.
When paving the cushion pad of the hot press, the cushion pad must be installed between the heat conducting plate of the hot press and the stainless steel formwork in the order from top to bottom. Buffer pads must be laid flat. Fixed first to prevent the introduction of debris in the pavement. Then the temperature will be raised to 60 - 80 degrees Celsius, and the pressure will be increased to make the pressure plate into a slightly closed state. In the process of fixing, only four angles of fixed length direction are needed, and the width direction is better not fixed. After pressing more than 200 - 300 sheets, the cushion shrinks slightly due to heating. It is necessary to adjust the tension of the cushion after shutdown. Press more than 200 - 300 sheets and adjust them again.
What should we pay attention to when installing cushion pad for hot-pressing plate is provided by Kunshan Hongxin Hot-pressing Plate Co., Ltd., one of the manufacturers of Suzhou Hot-pressing Plate.